Blazer 115 case splitting

Welcome to ArizonaShooting.org!

Join today!

thom

Member
AZS Supporter - Bronze
Joined
May 20, 2018
Messages
1,433
Location
chandler, near IKEA
A buddy bought a case of Blazer 115 ammo and on the 5th shot the case split at the bottom. Any suggestions on how this happened?13140.jpegView attachment 1
He was shooting an
Aero Precision EPC AR-9.
Thanks
Thom
 

Attachments

  • 13142.jpeg
    13142.jpeg
    82.2 KB · Views: 4,016
Case head separation. Normally caused by either an out of spec chamber or bumping the shoulder back too much when resizing.

https://youtu.be/h-2_NOSFcNY
 
Not the first time I’ve heard of the new Aero EPC having an out of battery detonation. There is a thread about it over on ARFCOM.
 
That's a blowback 9mm. There's no real shoulder to bump back.

Looks like it pulled it from the chamber way to early and was still pressurized causing it to break the casing as it was extracted.
 
Aero Precision said it was the magazine. He was using an ETS magazine. They recommended Glock or Magpul only.
 
Joe_Blacke said:
Case head separation. Normally caused by either an out of spec chamber or bumping the shoulder back too much when resizing.

https://youtu.be/h-2_NOSFcNY

Good information...thanks for posting that.
 
Back
Top