shooter444
Member
Very good!! Congratulations!! Looks excellent!!
Some things are just too simple to farm out, sometimes at ridiculous expense.
Some things are just too simple to farm out, sometimes at ridiculous expense.
Widening rear sight - or replace
- Thread starter Tenring
- Start date
Welcome to ArizonaShooting.org!
Join today!
Tenring
Member
Thanks Shooter - my XDM is going under the chain saw file tomorrow.
shooter444
Member
Sounds like you are quite comfortable with your new found skill,... maybe a little advanced challenge with some,... ' do-it-yourself ',... white dot sights, with a drill bit and white paint, could be in order? But, I wouldn't try it without a drill press, or a reasonable facsimile. 
Unless you feel confident enough with a punch and hand drill.
I like a vertical center white line rear sights, in conjunction with a white dot front sight,... a triangle file works well for that. I like to file away at an angle that produces a 1/8" wide line at the top, that tapers down to zero, at the length I want. Doesn't take much time at all!!
But, you do have to pull the rear sight off, to be precise.
Unless you feel confident enough with a punch and hand drill.I like a vertical center white line rear sights, in conjunction with a white dot front sight,... a triangle file works well for that. I like to file away at an angle that produces a 1/8" wide line at the top, that tapers down to zero, at the length I want. Doesn't take much time at all!!
But, you do have to pull the rear sight off, to be precise.Similar threads
- Sticky
