tabascoman79
Member
You need a trimmer. As a reloader it’s one of the first things you should get. I didn’t read where you said what you’re shooting these 223 out of. Bolt gun or semi.
If your brass is long it can cause pressure issues after it’s chambered. Cheapest option is to go on eBay and search Worlds cheapest trimmer. Pull the rounds apart you have and set the brass aside. But you should be measuring your brass. Feeling in the platform being used the brass could stretch enough to cause issues.
If it’s just work hardened and the shoulder is springing back after sizing, you need to anneal or scrap it.
If your brass is long it can cause pressure issues after it’s chambered. Cheapest option is to go on eBay and search Worlds cheapest trimmer. Pull the rounds apart you have and set the brass aside. But you should be measuring your brass. Feeling in the platform being used the brass could stretch enough to cause issues.
If it’s just work hardened and the shoulder is springing back after sizing, you need to anneal or scrap it.
