80% UZI

[jdrautoworks]

Ok so I want to know a little more... My welding skills are 110% but UZI is about .001%.

 

[Suck My Glock]

Ok so I want to know a little more... My welding skills are 110% but UZI is about .001%.

My understanding is that it requires TIG, and the most crucial welds are ones securing the trunion into the receiver because the bolt will be pounding on that trunion, attempting to dislodge it.

 

[jdrautoworks]

Ok so I want to know a little more... My welding skills are 110% but UZI is about .001%.

My understanding is that it requires TIG, and the most crucial welds are ones securing the trunion into the receiver because the bolt will be pounding on that trunion, attempting to dislodge it.

Got TIG covered, I wasn't even aware there were 80% out there I'll have so sit down this weekend and do a little research.

 

[goodaim]

Anyone know if there is a such thing as a transferrable micro uzi with RR? Or are they only bolt cnversions?

 

[brian10x]

Don't need no fancy smanchy TIG welder. I used a cheap HF wire feed and it holds together just fine. Fire 9mm +P++P all day.

 

[goodaim]

nice! Anyone have a mini uzi local they want to sell?