Hey P320 owners...

If it doesn't fit the topic in any of the other forums, and is firearm-related, put it here!
Post Reply
User avatar
Pro2a
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 926
Joined: May 14th, 2018, 4:21 pm
Reputation: 12
Location: Buckeye

Hey P320 owners...

#1

Post by Pro2a »

I'm thinking about building a P320
I saw a website somewhere that was talking about aftermarket slides and how they can affect reliability. Sig even has their own Pro Cut, with quite a few windows in the slide too.
I also see Jagerworks will mill the rear sight dovetail in the front or back of the optic.
For those of you who have done it (on any gun for that matter) without the dot in use, do you like it better or worse? Seems like on the compact it would even be a shorter sight radius and even less accurate, maybe like shooting on a 3" barrel.
Do you have an aftermarket slide on a P320, and is it running well?
Thanks in advance for your input and opinions.


User avatar
Pro2a
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 926
Joined: May 14th, 2018, 4:21 pm
Reputation: 12
Location: Buckeye

Re: Hey P320 owners...

#2

Post by Pro2a »

AZ1182 wrote: October 7th, 2020, 12:17 pm I have no experience with aftermarket Sig slides.

But I do have experience with the full and compact Sig slides. I'm actually better shooting the compacts but not so much with the full slides. Which is weird, because I shoot Glocks full size way better than Glock compacts.
Yes, I've found surprisingly great accuracy the compact/carry, not much comparison with Glock, but seem to be decent with a G48
User avatar
storage_man
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 409
Joined: May 19th, 2018, 5:53 am
Reputation: 4
Location: Phoenix

Re: Hey P320 owners...

#3

Post by storage_man »

I have a P320 X CARRY, but I do not at the current time have a after market slide. However I may need one in the near future (Long Story). I'm marking this thread for further reference.
curt1950
ArizonaShooting.org Bronze Supporter
ArizonaShooting.org Bronze Supporter
Posts: 70
Joined: October 12th, 2018, 1:16 am
Reputation: 0
Location: Prescott Valley

Re: Hey P320 owners...

#4

Post by curt1950 »

I have an M-18, Wilson frame , Gray guns spring and trigger kit. the M-18 is already cut for a red dot. that said there are several that make or modify the slide. https://www.armorycraft.com/sig-sauer-f ... e-triggers ; I have some stuff from them, they make nice stuff. https://sigparts.com/Default.aspx also make sig parts but I don't have any yet. https://www.zevtechnologies.com/ These guys seem to make some nice stuff, you might want to check them out. Good luck
Post Reply