Glock issue with Ghost-M (cross posted from Title II and NFA Firearms and Items)

Are you having problems with a rifle or handgun? Having problems with a magazine? This is the place to post for help or to help others. If you fixed that nagging problem with your AR-15, this is the place to post how you did it.
Post Reply
User avatar
RomeoWhiskey
New to ArizonaShooting.org
New to ArizonaShooting.org
Posts: 18
Joined: March 29th, 2020, 10:18 pm
Reputation: 0
Location: East Valley

Glock issue with Ghost-M (cross posted from Title II and NFA Firearms and Items)

#1

Post by RomeoWhiskey »

After a long 9 month and 9 day wait I got my Ghost-M out of jail and I was able to take it out to the range to test it out. It worked great with my Scorpion using a 3-Lug mount that I used Rockset to install on, I'm very happy with that so far! Unfortunately I had some cycling issues with my Glock 19. The Glock is all stock except for raised sights and a threaded barrel from Combat Armory. I experienced both failure to eject and failure to feed issues with two different mags shooting 147 grain CCI Blazer and 115 gain Fiocchi. I only tried with the suppressor in the long configuration. The Glock was able to cycle fine with the suppressor removed.

Anyone have any recommendations on what I should try?

I emailed Dead Air and they told me to lube the piston with high temp grease... Looked on Amazon and didn't see any so I haven't purchased any yet.


User avatar
muta4warrior
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 231
Joined: May 19th, 2018, 9:25 am
Reputation: 11
Location: East Mesa

Re: Glock issue with Ghost-M (cross posted from Title II and NFA Firearms and Items)

#2

Post by muta4warrior »

Are you running this https://deadairsilencers.com/product/booster-assembly/ on your can when you run the Glock or the 3 lug? Glocks need the booster to operate normally.
User avatar
TheJediknight
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 184
Joined: May 18th, 2018, 1:04 pm
Reputation: 6
Location: Phoenix
Contact:

Re: Glock issue with Ghost-M (cross posted from Title II and NFA Firearms and Items)

#3

Post by TheJediknight »

muta4warrior wrote: May 30th, 2020, 8:47 am Are you running this https://deadairsilencers.com/product/booster-assembly/ on your can when you run the Glock or the 3 lug? Glocks need the booster to operate normally.

This is true......

https://www.gemtech.com/l-i-d-linear-in ... upler.html
Post Reply