Page 1 of 1

HELP Plz... AR15 part needed asap

Posted: November 5th, 2020, 11:27 am
by NEFP
Yes, I am a moron... Working on my AR15 and launched my buffer detent and spring. Found 50%... Need a spring quickly. Any idea of a shop around Phoenix where I can grab one quick?

Re: HELP Plz... AR15 part needed asap

Posted: November 5th, 2020, 12:54 pm
by YNOTAZ
MLS Arms 2-photos
No reviews ยท Gun shop
15610 N 35th Ave Suite 6
Phone: (602) 845-0657

Last time I was in there he had a lot of parts. That was a while ago so call first.

Re: HELP Plz... AR15 part needed asap

Posted: November 5th, 2020, 9:05 pm
by dread_scott
Tombstone tactical carries small parts as well.

Im no expert, but i know some people run their AR's without the buffer detent and spring, because sometimes that little nub breaks off and if it does, it can get wedged into the FCG and cause issues. Those are few and far between, but it has been documented, just some food for thought.

Re: HELP Plz... AR15 part needed asap

Posted: November 5th, 2020, 9:40 pm
by YNOTAZ
Running an AR without a buffer detent is that last thing I would ever do unless it was an emergency.

The only way to damage the tit on the detent is to overtighten the buffer tube when installing it and bending or cracking the tit, or charging the firearm without the barrel installed which will allow the buffer weight to move a bit more forward smacking the detent tit really good, causing metal fatigue or cracks.

I don't know about anyone else but I would be much more worried about forgetting I had no detent, opening the AR, and launching my buffer weight and spring down the firing line, onto a hot range, or getting hit in the nuts with 3-8oz.

Then there's always the laughter and pointing that follows an now pictures on the Internet.

Re: HELP Plz... AR15 part needed asap

Posted: November 7th, 2020, 7:52 pm
by dread_scott
I run a regular detent and dont worry about it, but wanted to put it out there, that if necessary, it could be ran without one.

I know Russell Phagan of KE Arms runs without it and has for awhile with no issues. You can look up his videos as sinistral rifleman. Hes been doing competitions for 20 years, unsure how long detentless, but runs it always with no issues.

If you cant remember that you dont have a detent and to slowly open your AR to catch the spring, do you really think you can remember the manual of arms of using a firearm and the outrageously long list of firearm safety rules?!

Re: HELP Plz... AR15 part needed asap

Posted: April 20th, 2022, 7:55 pm
by tripletap
buy a bic lighter and take out the spring
same thing- Glockmonger taught me that 2002