Page 1 of 1
Grip screws for ParaOrdnance P14
Posted: May 12th, 2024, 12:30 pm
by smithers599
Lost a grip screw at the range yesterday.
ParaOrd is out of business. Cannot find OEM grip screws in the usual places: Brownells, Sarco, Numrich, etc.
I see some Allen-head screws on Amazon, Ebay, and elsewhere, but not the OEM slot-head screws. Those hex screws are my backup plan, but...
Do any of you know where I can find OEM grip screws?
Thanks.
Re: Grip screws for ParaOrdnance P14
Posted: May 12th, 2024, 12:52 pm
by kenpoprofessor
OK, I tried pasting a link to Amazon, it's not working. Just type in Para Ordnance grip screws, should come up.
Found these as well, unless they're special threads on your Para.
https://www.customfirearmproducts.com/p ... e-hardened
Have a great, gun carryin', Kenpo day
Clyde
Re: Grip screws for ParaOrdnance P14
Posted: May 12th, 2024, 12:55 pm
by smithers599
^^^
As I wrote, Allen-head screws are my backup plan if I can't find the OEM slot-head screws.
Re: Grip screws for ParaOrdnance P14
Posted: May 12th, 2024, 3:49 pm
by YNOTAZ
Remington bought and serviced Para's. They worked on my Para Warthog, try them or whatever is left of Remi.
Re: Grip screws for ParaOrdnance P14
Posted: May 12th, 2024, 4:03 pm
by Ballistic Therapy
Ace Hardware sells gun screws.
At least the one's by me do.
They have quite a good selection.
Re: Grip screws for ParaOrdnance P14
Posted: May 12th, 2024, 4:33 pm
by smithers599
Ballistic Therapy wrote: ↑May 12th, 2024, 4:03 pm
Ace Hardware sells gun screws.
At least the one's by me do.
They have quite a good selection.
Interesting. I'll make a point of stopping by Howard's at 32/Shea at first opportunity.
Re: Grip screws for ParaOrdnance P14
Posted: May 13th, 2024, 4:24 pm
by coltnut
Para Grip screws are shorter in length that slim grips screws and bigger in diameter than standard 1911 grip screws.Just took one off my Para 14.45 and compared to a 1911 grip screw.Totally different screws.
Just in case my blue lock tight mine in !
Re: Grip screws for ParaOrdnance P14
Posted: May 21st, 2024, 1:09 pm
by smithers599
Update, FWIW --
Nelson Ford had two in his godforsaken parts bin -- one flathead, one hex. I bought both; will keep the hex in the box as a spare.
Re: Grip screws for ParaOrdnance P14
Posted: June 15th, 2024, 1:29 pm
by Maddog1
smithers599 wrote: ↑May 21st, 2024, 1:09 pm
Update, FWIW --
Nelson Ford had two in his godforsaken parts bin -- one flathead, one hex. I bought both; will keep the hex in the box as a spare.
Use some blue loctite..they won't move out then
Re: Grip screws for ParaOrdnance P14
Posted: June 15th, 2024, 2:16 pm
by smithers599
Maddog1 wrote: ↑Yesterday, 1:29 pm
smithers599 wrote: ↑May 21st, 2024, 1:09 pm
Update, FWIW --
Nelson Ford had two in his godforsaken parts bin -- one flathead, one hex. I bought both; will keep the hex in the box as a spare.
Use some blue loctite..they won't move out then
Yep. Did that.