CZ Mag Fed AR9

Discuss work on firearms; whether that is making yours from the ground up, milling an 80%, putting together a kit, or fine tuning a trigger job.
Post Reply
User avatar
azdover
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 218
Joined: May 24th, 2018, 5:14 am
Reputation: 7
Location: Anthem

CZ Mag Fed AR9

#1

Post by azdover »

Plan A - Matador Arms adapter with Anderson lower, Macon 5 inch barrel, FM9 bolt, and tungsten powder filled 8 ounce buffer.

Image
Last edited by azdover on December 5th, 2021, 1:40 am, edited 2 times in total.


User avatar
azdover
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 218
Joined: May 24th, 2018, 5:14 am
Reputation: 7
Location: Anthem

CZ Mag Fed AR9

#2

Post by azdover »

Plan B - a shimmed magwell with a "caveman" modded mag release using an Aero Precision EPC upper and lower, a 16" Shooting Innovations ramped barrel, FM9 bolt, and a Blitzkrieg hydraulic buffer (much smoother recoil than with the tungsten powder filled buffer I used before). I've only run about 100 rounds of factory and handloaded FMJs and JHPs with no problems yet. Everything has fed and ejected smoothly. So far, off to a good start

Image

Image
Post Reply