10mm AR

[knockonit]

well now has anyone assembled one, and issues if any, personal experiences only, not interested in the other brother by another mothers experiences or your uncles aunt.
thanks all
Rj

[XJThrottle]

No experience in 10. I'm looking at doing a 9 with Glock mags.

[knockonit]

No experience in 10. I'm looking at doing a 9 with Glock mags.

i assembled two, one with colt mags and one with glock mags, both function quite well, couple things, need to make sure of buffer length, they offer a 4 inch unit that assists in not fubaring the trigger and bolt catch on recoil return, and spring, or u can add a spacer, several compansies make them, only found this out in last few days, as my .45 acp assemblance, fubared a buffer tube, detent ect, due to recoil. so ordered some spacers, and soon will tell wtf will happen next.

10 mm is suggesting a 8-10 oz buffer and tuff arse spring, we will see, problem is finding a barrel lenght i want, seems everybody wants to build pistol size carbines, not me want something a little longer.
happy monday
Rj

[lostdog99]

If I did a PCC I would go with a 10mm also. When you have a finished product that you are happy with I would be interested in the details of the build and how to solve the problems.
Thank you

[lostdog99]

If I did a PCC I would go with a 10mm also. When you have a finished product that you are happy with I would be interested in the details of the build and how to solve the problems.
Thank you

[Kingjoey]

There is/was a company doing a short DI system for those, would definitely prefer to have a locking breech to reduce how much weight is bouncing back and forth. Using an RDB setup from CMMG would help too