80% AR lower jig

[TangoDown]

I used the 5D kit with the AR10 adapter. Gonna be selling both pretty soon since I have no interest in milling out another lower.

Pretty easy and straight forward enough. The company had a couple different videos with clear instructions. It's also a pretty fun learning experience.

[XJThrottle]

Is yours the original or Pro?

If original, I'd be interested in the AR10 adapter.

[TangoDown]

Is yours the original or Pro?

If original, I'd be interested in the AR10 adapter.

It's the original.

[XJThrottle]

Is yours the original or Pro?

If original, I'd be interested in the AR10 adapter.

It's the original.

Would you sell the 10 stuff separate?

[TangoDown]

Is yours the original or Pro?

If original, I'd be interested in the AR10 adapter.

It's the original.

Would you sell the 10 stuff separate?

I don't mind, as long as you know you need the AR15 jig kit as the 10 kit uses parts from it.

To clarify, this is the kit I have. https://www.5dtactical.com/ProductDetai ... 15-308-KIT

[XJThrottle]

It's the original.

Would you sell the 10 stuff separate?

I don't mind, as long as you know you need the AR15 jig kit as the 10 kit uses parts from it.

To clarify, this is the kit I have. https://www.5dtactical.com/ProductDetai ... 15-308-KIT

I'm aware. Most of the posts, and all of pics, in this thread are mine.

[Desert Rat]

So will there be an AR-15 jig available? Or will part be going with the adapter? I may be interested.

I don't mind that you have hogged my thread!! It has been informative! Thanks

[XJThrottle]

LOL..

I'm just after the 10 parts. They are adapters you use on the base kit, which should still be usable for 15s.