Page 1 of 3

Form1 suppressor

Posted: November 28th, 2018, 6:32 pm
by XJThrottle
Who do you put as the manufacturer? Doing the Eform, gets hung up there. Doesn't accept "self", a variation of my name, etc...

Help..

Re: Form1 suppressor

Posted: November 28th, 2018, 6:41 pm
by superdrag67
IIRC, you use FMI. I honestly don't remember what that stands for.

It should be detailed out in this thread:
https://www.ar15.com/forums/armory/-/17-493132/

Re: Form1 suppressor

Posted: November 28th, 2018, 7:36 pm
by XJThrottle
Fingers crossed

Re: Form1 suppressor

Posted: November 29th, 2018, 5:59 pm
by superdrag67
What do you plan on making?

Re: Form1 suppressor

Posted: November 29th, 2018, 6:16 pm
by XJThrottle
7"ish one for 22. Probably use one of the Jmpf kits to build from. All the parts would be around $150. I can do the machining with the tools at work. Unless there are better options than that.

It's the caliber I really want to shot NOW.

When all my normal stamps clear I'll have a Saker762, Octane45, Ghost-M, and a Mask. So, I'll have a decent balance of "real" ones. Rifle, 2 pistol, and a rimfire. I can use one of the rimfire cans on a rifle and the other on a pistol.

Re: Form1 suppressor

Posted: December 3rd, 2018, 8:00 pm
by XJThrottle
They must be feeling the holiday spirit. Got my control number emailed to me at 9:16pm on a SUNDAY night..

What?!

Re: Form1 suppressor

Posted: December 15th, 2018, 11:08 am
by XJThrottle
Approved!! 12-14

5:02am AZ time too. Somebody on the east coast didn't even wait to get a gallon of coffee down before they got to work.

Speaking of, looks like it's my turn to get to it...

Are there other options as far as "kits" for this? I'd mentioned the JMPF before, just wondering if I could/should look other places?

Re: Form1 suppressor

Posted: January 8th, 2019, 1:55 pm
by XJThrottle
Second one in the mix...

Re: Form1 suppressor

Posted: January 8th, 2019, 4:47 pm
by superdrag67
You finish the first one? Or decide what to do with it yet?
I haven't really kept up on F1 suppressor stuff.

Re: Form1 suppressor

Posted: January 8th, 2019, 6:26 pm
by XJThrottle
Gonna work with solvent trap kit stuff..

When filling out the paper work you really aren't nailing yourslf down too speifically on the details of the build. You have to pick a length, and caliber. But, "multi" is an option, and from what I've read you just can't make it longer than what than you state.

Even if I spend more on one of these than a "bought" can, it'll have it WAY sooner.

Re: Form1 suppressor

Posted: January 8th, 2019, 6:29 pm
by XJThrottle
Also, I got my controll number back immediately. With my other eF1s it has taken several days. This will allow me to get the wait started a few days earlier.

Re: Form1 suppressor

Posted: January 10th, 2019, 8:49 am
by omegaman
Sd tactical is up in Prescott built my f1's off there TI tubes.

Re: Form1 suppressor

Posted: February 23rd, 2019, 2:01 pm
by XJThrottle
C767F2C1-09DF-4C5B-943B-2E293171E1D1.jpeg

Re: Form1 suppressor

Posted: February 23rd, 2019, 3:01 pm
by XJThrottle
Video won't load :doh: .

Re: Form1 suppressor

Posted: May 15th, 2019, 4:38 am
by Gatsby
Now that it's been a few months and you've had some time to test, I was just wondering if we could get an update on your build, the kit you used, how it all held up, cleaning, etc. Is it something you'd do again, changes you would make on the next one, etc?

Thank you!
Joe