ArizonaShooting.ORG

I'd like to run my Saker 7.62 on my Tavor x95, but I am unsure about how to properly mount the muzzle device for concentricity.

I have both the sico specwar brake and flash hider at my disposal, but the problem is the Tavor has no defined shoulder on which to either tighten or time the muzzle device, instead using a jam nut against the factory flashhider.

Anyone have any experience here?

Thank you

Solved. Remove the jam nut, and use the flash hider ( brake won't work, not enough shoulder for shims) to thread to the base of the threads, and secure with rocksett. Worked great today.

Here is the official from silencerco:

"You can use a flash hider, with the jam nut removed, without issue.

If you wanted to use a muzzle brake, there is a company called KBA that makes a shoulder ring, that can be used in order to be able to properly index a muzzle brake."

I've got the ASR brake on mine no problem. Just shims and the brake once I removed the jam nut. Runs suppressed just fine.

Good to know that the flash hider worked, I may switch to that. Thanks.