Page 1 of 1
Any Phoenix shops that help with SBR process?
Posted: January 22nd, 2022, 5:05 pm
by Desert2007
Planning to have Glock 17L put into a B&T USW-G chassis which will make it an SBR, first NFA item for me so no prior work has been done. Wanting to know if there is any shops that assist with the paperwork, fingerprinting (or directions where to), engraving ETC.
If it makes more sense I can purchase the Glock from/through them as I have been waiting to see if thats the best option financially.
Re: Any Phoenix shops that help with SBR process?
Posted: January 22nd, 2022, 5:09 pm
by XJThrottle
E-file a form 1. It's a very easy process.
Re: Any Phoenix shops that help with SBR process?
Posted: January 22nd, 2022, 5:16 pm
by Desert2007
XJThrottle wrote: ↑January 22nd, 2022, 5:09 pm
E-file a form 1. It's a very easy process.
I know its not difficult, but doesnt it still have to get engraved?
Re: Any Phoenix shops that help with SBR process?
Posted: January 22nd, 2022, 6:49 pm
by XJThrottle
Desert2007 wrote: ↑January 22nd, 2022, 5:16 pm
XJThrottle wrote: ↑January 22nd, 2022, 5:09 pm
E-file a form 1. It's a very easy process.
I know its not difficult, but doesnt it still have to get engraved?
Imagine so.
I've done several F1s. Super easy. It takes a minute to figure out the layout of the site. But, then is was smooth. It might be different now that the just remolded it for form 4s... I did my print cards at a place in Tempe. They do digital scans and it's cheap for reprints when needed..
https://911occmed.com/arizona-dps-finge ... ance-card/
When I needed to get the engraving done I took my stuff to Glock_holiday when he still had his shop. Not sure where to go now.. He might have a suggestion.
Re: Any Phoenix shops that help with SBR process?
Posted: January 23rd, 2022, 1:53 am
by QuietM4
Yes, you have to engrave it with your name/Trust/LLC, etc and your location...."Joe Blow Chandler, AZ"
Re: Any Phoenix shops that help with SBR process?
Posted: October 16th, 2022, 2:52 am
by shansen751
E-form 1 on the ATF website. Pretty easy I just did 1. And there are videos on YouTube that walk you through it. I am changing my MCX pistol to a SBR and I just used the serial # that was already on the lower receiver so I don’t think I have to get anything engraved. There is a place on 5th ave and Union Hills called MLS Arms. They do engraving, also fingerprinting and they have the fingerprint cards. Very nice and professional people to work with.
Re: Any Phoenix shops that help with SBR process?
Posted: October 16th, 2022, 7:06 am
by Tenring
Agreed Rick at MLS Arms is good people.
Re: Any Phoenix shops that help with SBR process?
Posted: October 16th, 2022, 8:10 am
by YNOTAZ
shansen751 wrote: ↑October 16th, 2022, 2:52 am
E-form 1 on the ATF website. Pretty easy I just did 1. And there are videos on YouTube that walk you through it. I am changing my MCX pistol to a SBR and I just used the serial # that was already on the lower receiver so I don’t think I have to get anything engraved. There is a place on 5th ave and Union Hills called MLS Arms. They do engraving, also fingerprinting and they have the fingerprint cards. Very nice and professional people to work with.
YES you still have to engrave it. A form 1 is a stamp to manufacture, you become a manufacturer and have to engrave name, city, state, name is you or your trust or your LLC, The serial number can remain unchanged. If you did a trust or other, hopefully it doesn't have a long name like:
William H Doe family firearms revocable living trust of 2022
Snottsdale, AZ
That works good on paper but finding a spot to engrave a short novel on a firearm is a chore.
Re: Any Phoenix shops that help with SBR process?
Posted: October 16th, 2022, 8:24 am
by Mike-4
What step of the Form 1 process does the engraving occur? Does engraving occur after the Form 1 has been approved and you have to send in pics? Form 1 newbie here.
Re: Any Phoenix shops that help with SBR process?
Posted: October 16th, 2022, 10:45 am
by QuietM4
Mike-4 wrote: ↑October 16th, 2022, 8:24 am
What step of the Form 1 process does the engraving occur? Does engraving occur after the Form 1 has been approved and you have to send in pics? Form 1 newbie here.
You can engrave it at any point, but most people wait until they get the approved form 1 back from ATF. No pictures of the firearm are required. Wright Armory in Mesa engraved my last SBR…made an appointment and they did it while I waited.
Re: Any Phoenix shops that help with SBR process?
Posted: October 17th, 2022, 7:15 am
by TriggerFish
I had 2 done while I waited at Mr. Silencer/Mesa, now: East Valley Tactical/Mr. Silencer-Mesa
Re: Any Phoenix shops that help with SBR process?
Posted: November 16th, 2022, 4:04 pm
by Mike-4
Did you guys use digital or standard fingerprints?
Re: Any Phoenix shops that help with SBR process?
Posted: November 16th, 2022, 4:41 pm
by QuietM4
Mike-4 wrote: ↑November 16th, 2022, 4:04 pm
Did you guys use digital or standard fingerprints?
Digital, but make sure you can keep the file...you can re-use it on future NFA projects.
Re: Any Phoenix shops that help with SBR process?
Posted: November 25th, 2022, 7:54 am
by Mike-4
QuietM4 wrote: ↑November 16th, 2022, 4:41 pm
Mike-4 wrote: ↑November 16th, 2022, 4:04 pm
Did you guys use digital or standard fingerprints?
Digital, but make sure you can keep the file...you can re-use it on future NFA projects.
Where did you get your digital finger prints? I'm in Gilbert.
Re: Any Phoenix shops that help with SBR process?
Posted: November 25th, 2022, 9:07 am
by QuietM4
Mike-4 wrote: ↑November 25th, 2022, 7:54 am
QuietM4 wrote: ↑November 16th, 2022, 4:41 pm
Mike-4 wrote: ↑November 16th, 2022, 4:04 pm
Did you guys use digital or standard fingerprints?
Digital, but make sure you can keep the file...you can re-use it on future NFA projects.
Where did you get your digital finger prints? I'm in Gilbert.
Google “live scan fingerprint”.