Ruger Mark 1 won't cock

Discuss handguns, revolvers and other pistol-type arms.
User avatar
MarkItZero
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 574
Joined: September 13th, 2018, 6:52 pm
Reputation: 8
Location: Tombstone, AZ

Ruger Mark 1 won't cock

#1

Post by MarkItZero »

New to me, but not new (made in 1980).

Took it apart to get more accustomed with it. I've disassembled and reassembled several pistols that aren't considered easy (tokarev, cz-52). But they weren't kidding when they said maintenance on a Ruger 22 is tough!

Came apart no problem but I spent 45 minutes and tons of curse words trying to get the pistol reassembled. Couldn't get the part that pulls out of the backstrap back in for the life of me. Finally got it back together and now the pistol won't cock? Can only pull back about half way. This thing is driving me nuts.
IMG_20200924_215848551.jpg


User avatar
Fragout21
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 35
Joined: September 19th, 2020, 7:20 am
Reputation: 0
Location: Tucson

Re: Ruger Mark 1 won't cock

#2

Post by Fragout21 »

I remember having the same difficulties assembling my Ruger MK 1 for the first few times. Below is a link to a Ruger Assembly manual I found online. You might not be catching the hammer when you reassembled it.

https://ruger-docs.s3.amazonaws.com/_manuals/markI.pdf
User avatar
MarkItZero
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 574
Joined: September 13th, 2018, 6:52 pm
Reputation: 8
Location: Tombstone, AZ

Re: Ruger Mark 1 won't cock

#3

Post by MarkItZero »

Got it back together and functioning but I'm still not sure how or if I will be able to do it again 🤔
User avatar
YNOTAZ
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 1554
Joined: June 3rd, 2018, 10:01 am
Reputation: 8
Location: NW Valley

Re: Ruger Mark 1 won't cock

#4

Post by YNOTAZ »

Very common problem for new Ruger owners. Watch 2 minutes of this video on assembly. I started it at the appropriate spot. If you lean the gun muzzle up at this point the arm falls in the correct spot. If it doesn't it will not cock, just as you described. If you ask how I know, a friend told me. :D :D

User avatar
Winmagbill
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 236
Joined: May 14th, 2018, 5:03 pm
Reputation: 1

Re: Ruger Mark 1 won't cock

#5

Post by Winmagbill »

Have the same gun! My first handgun. Can’t really explain how I do it put when you insert the main spring housing piece flip the gun upside down. Then tilt the barrel down as you insert it. Once it’s in tilt it back so the hammer strut seats in the pocket. Then close it up, you’ll feel the tension and latch. I think that’s the method. Still have it but don’t shoot it that often. Teenage me could assemble it with my eyes closed. Must have been some John Wayne movie influence!
User avatar
Ballistic Therapy
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 1438
Joined: June 18th, 2018, 4:05 pm
Reputation: 2
Location: Pima County

Re: Ruger Mark 1 won't cock

#6

Post by Ballistic Therapy »

Once you have done it a couple times , it is not that hard.
After awhile you will get the hang of it.


You can also install a hammer strut support to make it a little easier.
These do help.
https://www.hammerstrutsupport.com
User avatar
Intel6
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 130
Joined: July 24th, 2018, 3:43 pm
Reputation: 1
Location: SE AZ

Re: Ruger Mark 1 won't cock

#7

Post by Intel6 »

That is how you know you assembled it incorrectly. You need to get the hammer strut in the top cup of the mainspring housing like others have said. Once you know what you need to do, it is easy and you wont have any issues again.
User avatar
MarkItZero
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 574
Joined: September 13th, 2018, 6:52 pm
Reputation: 8
Location: Tombstone, AZ

Re: Ruger Mark 1 won't cock

#8

Post by MarkItZero »

Ballistic Therapy wrote: September 25th, 2020, 4:28 am Once you have done it a couple times , it is not that hard.
After awhile you will get the hang of it.


You can also install a hammer strut support to make it a little easier.
These do help.
https://www.hammerstrutsupport.com
I don't know what's more amazing, how much of a difference a tiny piece of metal makes or the fact that Ruger didn't engineer and install that piece themselves in 70+ years. :doh:

I'd always heard this pistol was a pain to reassemble but I'd heard similar things about the tokarev and CZ-52 as well and I was able to figure those out ok. I guess I thought if I could figure out the quirks of designs made by humorless, godless communists that the quirks of a production, American capitalist pistol wouldn't be much of an issue. Turns out I was way wrong....
User avatar
Winmagbill
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 236
Joined: May 14th, 2018, 5:03 pm
Reputation: 1

Re: Ruger Mark 1 won't cock

#9

Post by Winmagbill »

Well if you ever get a Walther P22 don’t throw away the piece of wood that comes with it!

Those funny Germans.
User avatar
MarkItZero
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 574
Joined: September 13th, 2018, 6:52 pm
Reputation: 8
Location: Tombstone, AZ

Re: Ruger Mark 1 won't cock

#10

Post by MarkItZero »

Winmagbill wrote: September 25th, 2020, 9:02 am Well if you ever get a Walther P22 don’t throw away the piece of wood that comes with it!

Those funny Germans.
I bought one of those off Armslist a few weeks ago. On closer inspection I just didn't care for the fit and finish. Then I noticed it would fire with the safety on and that it had already been returned to Walther on a warranty claim in the past.

Promptly passed it on and I've added Walther to the list of manufacturers I won't buy.
User avatar
Winmagbill
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 236
Joined: May 14th, 2018, 5:03 pm
Reputation: 1

Re: Ruger Mark 1 won't cock

#11

Post by Winmagbill »

Sounds like you got a bubba’d P22. They can be a great little gun especially with the longer 5” barrel.
User avatar
Ballistic Therapy
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 1438
Joined: June 18th, 2018, 4:05 pm
Reputation: 2
Location: Pima County

Re: Ruger Mark 1 won't cock

#12

Post by Ballistic Therapy »

MarkItZero wrote: September 25th, 2020, 9:21 am
Winmagbill wrote: September 25th, 2020, 9:02 am Well if you ever get a Walther P22 don’t throw away the piece of wood that comes with it!

Those funny Germans.
I bought one of those off Armslist a few weeks ago. On closer inspection I just didn't care for the fit and finish. Then I noticed it would fire with the safety on and that it had already been returned to Walther on a warranty claim in the past.

Promptly passed it on and I've added Walther to the list of manufacturers I won't buy.
Let me guess , it was a Smith & Wesson Walther.
User avatar
MarkItZero
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 574
Joined: September 13th, 2018, 6:52 pm
Reputation: 8
Location: Tombstone, AZ

Re: Ruger Mark 1 won't cock

#13

Post by MarkItZero »

Not that I recall, it did have a compensator on it if that helps
User avatar
smithers599
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 4362
Joined: June 29th, 2018, 6:58 am
Reputation: 23
Location: East side

Re: Ruger Mark 1 won't cock

#14

Post by smithers599 »

Bill Ruger was a genius. Years before YouTube existed, or was even imagined, Ruger designed a gun that could not be reassembled without watching a YouTube video. What a visionary!
Doc Holliday
ArizonaShooting.org Member
ArizonaShooting.org Member
Posts: 545
Joined: February 24th, 2019, 11:15 am
Reputation: 4
Location: East Side

Re: Ruger Mark 1 won't cock

#15

Post by Doc Holliday »

"Ruger Mark 1 won't cock"

What a coincidence, neither would my ex-wife.
Post Reply