Page 1 of 1
Any other tangfolio TA90 owners ?
Posted: December 16th, 2023, 2:49 pm
by wasr10ak
Anyone else have a TA90 ?
Is it know for having a very stiff recoil spring ?
I’m lost on looking for an aftermarket lighter spring
Re: Any other tangfolio TA90 owners ?
Posted: December 17th, 2023, 11:17 am
by zonie77
I don't have one but it's a cz75 clone. That might help. Good Luck!
Re: Any other tangfolio TA90 owners ?
Posted: December 17th, 2023, 12:21 pm
by zonie77
It's an external hammer so if you cock the hammer first it's easier to rack.
Re: Any other tangfolio TA90 owners ?
Posted: December 17th, 2023, 1:00 pm
by RufusXG
May or may not be helpful:
https://www.gunsprings.com/EAA/cID1/mID19/dID100
"Includes the following models:
EAA Witness Series Pistols
Tanfoglio TZ-75, TZ-90 and TZ-95 Pistols"
Re: Any other tangfolio TA90 owners ?
Posted: December 17th, 2023, 9:41 pm
by tunnug
I own witneses in several calibers, no problems with any one of them that I have noticed.
Re: Any other tangfolio TA90 owners ?
Posted: December 18th, 2023, 5:33 pm
by blasternaz
Part of the problem with the "hard" racking is the narrowness of the slide. Less meat to grab onto and it's tapered, which leads to your fingers wanting to slide off/up. If you cock the hammer, it reduces the effort a fair bit. I've conversion top ends for most of the pistol calibers, and all the center fire ones are that way. Just the nature of the beast....
Re: Any other tangfolio TA90 owners ?
Posted: January 14th, 2024, 10:57 pm
by wasr10ak
thank you everyone who responded.